The mooted introduction of plastic roads in Bangladesh promises to bring a wide range of benefits, from cutting down on road maintenance costs to help with the management of plastic waste.
According to experts, using plastic instead of asphalt can make roads more resistant to heavy rain and heat, which are both major causes of road damage in the country. Furthermore, Bangladesh generates over one million tons of plastic waste each year, which can be repurposed into road construction materials.
"The plastic road concept will be convenient for Dhaka if the technology can be used through efficient management," said Prof Shamsul Hoque, an infrastructure expert.
"Most countries in the world use recycling technologies to save money and protect the environment," he added.
How are plastic roads installed?
According to VolkerWessels, a Dutch construction company, the plastic road concept consists of a prefabricated, modular, and hollow road structure based on recycled plastics.
The prefabricated production, as well as the lightweight and modular design of the plastic road, makes construction faster, simpler, and more efficient compared to traditional or bituminous road structures.
The prefabricated sheets are installed on site directly like the installation of a bridge's span. Each sheet is recyclable and replaceable where necessary, according to VolkerWessels.
As the sheets are lightweight and hollow, they can be easily removed to allow for plumbing and cable installation. Prefabricated roads have already been tested in the Netherlands.
Are plastic roads feasible in Bangladesh?
Experts believe that constructing plastic roads will provide a potential solution for the country's long-standing problems with road maintenance.
Roads constructed with bitumen are vulnerable to heat and humidity during the summer and in the monsoon, which is why they usually develop cracks and potholes within a short time in subtropical climates such as that of Bangladesh.
According to VolkerWessels, traditional bitumen roads are unsustainable, brittle and they contribute over 1.6 million tons of carbon dioxide to the atmosphere around the world each year.
On the other hand, plastic roads are based on recycled plastics, giving them a significantly smaller carbon footprint than traditional road structures. Asphalt roads also take three times longer to pave than plastic roads.
Inspired by the plastic road concept, the Civil Aviation Authority of Bangladesh (CAAB) has been using similar technology to construct new runways at the airports in Dhaka, Cox's Bazar and Sylhet.
Also Read:
- Could roads from recycled plastics change Dhaka?
- Plastic road: The next step in road infrastructure?
- Are plastic roads cost-effective for Bangladesh?
- Govt mulls plastic roads from next year
The Dhaka city authorities are also looking to introduce sustainable plastic roads.
"We are always searching for convenient modern technologies instead of traditional ones as city dwellers love to see something new. So why not apply the plastic road concept, if it seems better?" said Dhaka North City Corporation (DNCC) Mayor Atiqul Islam.
Brig Gen Muhammad Amirul Islam, chief engineer of DNCC, said: "The technology of plastic roads can be a way of getting better roads. As our city is expanding, we have the opportunity to install such roads.”
He added that the ease with which plastic roads can be removed to repair underground cables and pipes makes them particularly attractive.
Munshi Abul Hashem, superintendent engineer (civil) of Dhaka South City Corporation (DSCC), said: "Such sort of roads can bring about relief if we can implement them properly.”
Prof Shamsul Hoque said plastic roads are suitable for Bangladesh, but they still need continuous monitoring and maintenance.
Are plastic roads cost-effective?
Generally, the cost would vary depending on the process that would be used to construct the plastic roads.
Shamsul Hoque, professor of at the department of civil engineering in Buet, said: "There are mainly two methods to construct plastic roads – wet process and dry process. If the wet process is used, it would increase the construction cost, but the dry process would typically reduce it."
In the dry process, waste plastic is mixed with construction aggregates in equal proportions and then with hot bitumen. The plastic is shredded and heated to 165 degrees Celsius before transferring to a mixing chamber with aggregates. Later, bitumen heated at 160 degrees Celsius is transferred to the chamber and mixed, he explained.
“This process should be cost-effective as use of stones would be reduced in road construction,” he added.
Explaining the wet process, Shamsul Hoque said: “The wet process is very simple and also smooth for road construction. Nowadays, there are many industries in the country that sell liquid plastic that can be mixed with bitumen. We would only need a plant with machines to mix the two materials.
“However, liquid plastic is more expensive than shredded plastic. The cost would increase more if the liquid plastic was imported.”
The Indian government recently used dry technology to construct highways, which is expected to reduce construction cost by 50%. But Bangladeshi experts have suggested using the wet process because it is easy and also makes roads more durable.
Stating some of the limitations involved, Shamsul Hoque said it would be difficult to collect waste plastic in one place to manage the whole process. Moreover, if the wet process was used, big investments and equipment would be needed to carry out the construction.
Plastic roads have been in use in Europe since the 1970s, while India introduced plastic roads in 2000. Jambulingam Street in Chennai is one of India’s first plastic roads.