The Accord on Fire and Building Safety has asked the RMG factory owners to get prior approval from it on the design of the fire alarms, sprinkler systems and auto-hydrant before installing the systems in their factories.
“If the installation work is done without reviewed designs, the system might not be recognised by the Accord,' the retailers' platform, categorically said in a statement posted on its official website on Tuesday.
The Accord completed inspection of 1,106 RMG units and found less than 2% factories flawed in all three areas like fire, electrical and structural safety.
Following the recommendation of the Accord's engineers, the review panel has closed 18 factories.
According to a rough estimate of Bangladesh Garment Manufacturers and Exporters Association (BGMEA), installment of fire safety equipment at the RMG factories may cost over Tk2,400 crore.
Based on the inspecting findings, the Accord suggested for detailed Engineering Assessment (DEA), setting up fire rated doors, sprinklers systems and auto-hydrant to ensure workplace safety for the RMG workers.
Meanwhile, the Accord outlined standard for appointing consulting firms to do detailed engineering assessment (DEA).
As per the standard, the firm must have the experience for more than five years in the relevant field and engineers concerned will have to have the experience of more than 10 years.
Though the Accord did not provide any lists of the consulting firms to conduct DEA as yet, it said the final DEA report must be approved by the Accord and no retrofitting work should be started without prior approval from the retailers group.
The Accord, however, provided a list mentioning the name of 55 companies to source fire equipments with a note that the list is neither an endorsement nor an approval by the Accord.
'The list of suppliers we have compiled to help factories to source fire equipment is based on the information provided by the suppliers. We do not make any quality check during the process of enlistment,' the Accord said.
As per the remediation guidance of Accord, fire door should be certified by UL, FM, Intertek and Warrington and manufactured by an authorised fire door manufacturing facility.
If any factory installed non-certified doors, which fell short of the standard set by the Accord, won't be accepted and the factory would again have to be replaced by actual certified fire doors, the platform said.
There is no authorised manufacturer of certified fire doors and no authorised Bangladesh-based certifying agency of fire doors or fire door manufacturing facilities in Bangladesh, the Accord stated.
The buyers platform also also suggested to remove all collapsible gates from the doorways and stairways permanently and to equip fire doors with security hardware and locks which permit locking from the outside where the door can still be opened from the inside.
The Accord had committed to improve safety standard, including fire, electrical and structural safety after the collapse of Rana Plaza, which killed 1,135 workers and injured over 2,500 last year.